What is sand blasting machine?

Sand blasting is the process of propelling fine, abrasive materials at high velocities to achieve a number of results. It is used for cleaning, deburring, removing paint and coatings, shot-peening, and other methods for finishing.
When it comes to industry professionals, the blast machine is the key piece of equipment for sandblasting. industrial, facility owners, shipyards, rail yards, and other are require durable pressure blasting equipment for cleaning, corrosion control. These multi-purpose machines are powerful and require a certain degree of skill and safety precautions to operate, but the mechanisms of the machine itself are relatively simple enough to understand.

 
For effective sand blasting work, it has become mandatory to know about the sandblasting machine’s equipment and its operation processes. If you are an owner of a company or your job profile is related to sandblasting work, you must read this article. In this article, we are going to cover almost all the details related to sandblasting machine equipment and its work processes. But before we describe it let me also tell you something more about it. Sandblasting is also called as Abrasive blasting. There are several variants of its a process, such as a bead blasting, sandblasting, shot blasting and soda blasting, etc.

Sand Blasting Method or how it works?

Wheel Blasting:

Wheel machines are a high-power, high-efficiency blasting method with recyclable abrasive. mainly wheel blast machines propel plastic abrasive in a cryogenic chamber; this type of wheel blasting is usually used for deflating plastic and rubber components. The size of the wheel blast machine and the number and power of the wheels depends on the parts to be blasted and on the expected result and efficiency.

Hydro-Blasting: 

It is commonly known as water blasting, and it is a common abrasive blasting operation because it is very effective and, in most cases, will only require one operator. In this process, water is used to remove old paint, chemicals, or buildup without damaging the previous surface. This method is ideal for cleaning internal and external surfaces because the operator is mainly able to send the stream of water in places.

Blast Room:

it has the third type of blast cabinet. Mostly the recycling will be used in blast room from manual recycling to full reclaim floors that convey the abrasive pneumatically or mechanically to a device that cleans the abrasive prior to recycling.

Micro-Abrasive Blasting: 

Micro-abrasive blasting uses smaller nozzles to provide a fine stream of abrasive accurately to either a small part or a small area on a larger part. Micro-abrasive blasting uses media with particle sizes from 10 micrometers up to about 150 micrometers and usually higher pressures than most of the larger blasters 40 psi to 150 pounds per square inch deliver sufficient energy to these small particles. However, the equipment for abrasive blasting usually consists of but is not limited to a hand-held nozzle that directs a stream of abrasive particles. Therefore abrasive is mixed with air in a mixing chamber in order to transport it to the nozzle where it is subject to a high-velocity air stream that propels it towards the job.

Leading Manufacturer & Supplier of Portable Sand blasting machine